2013.9 – 2017.2，英国巴斯大学（University of Bath），机械工程学院 ，博士 – 机械工程
2010.9 – 2013.1，北京航空航天大学， 能源与动力工程学院，硕士 – 动力工程与工程热物理
2010.1 – 2010.6，法国巴黎高等航空技术与汽车制造学院， 航空航天工程，国际交换 – 航空航天工程
2006.9 – 2010.6，北京航空航天大学，能源与动力工程学院，本科 – 动力工程与工程热物理  

2026.3 至今，36365线路检测中心no1，36365线路检测中心no1，副教授
2025.6 – 2026.1，英国巴斯大学（University of Bath），机械工程学院，Senior Lecturer（副教授，永久教职，博士生导师）
2020.2 – 2025.5，英国巴斯大学（University of Bath），机械工程学院，Lecturer（助理教授，永久教职，博士生导师）
2018.5 – 2020.5，英国巴斯大学（University of Bath），机械工程学院，Prize Fellow（博士生导师）
2017.2 – 2018.5，英国巴斯大学（University of Bath），机械工程学院，Research Associate（博士后）

• 先进航空发动机/燃气轮机冷却封严系统（二次空气系统）：内部高速旋转流动与换热理论、旋转流动数值模拟、机器学习技术应用、压气机/涡轮部件传热稳态与瞬态实验测量方法与不确定度分析、超高压比航空发动机叶尖间隙预测及主被动控制技术等
• 航空发动机/燃气轮机涡轮部件：冷却与封严技术、气膜冷却传热反问题建模等
• 航空发动机流动换热理论建模
• 航空发动机高空结冰理论与建模技术

现招收博士研究生和硕士研究生，感兴趣的同学欢迎邮件联系huitang@sjtu.edu.cn

• 英国巴斯大学高级访问研究员（Visiting Senior Research Fellow）

• 美国机械工程师协会（ASME）传热协会会员

• 2025, ASME Turbo Expo 会议组织—空气系统方向总负责人（Vanguard Chair）
• 2024, ASME Turbo Expo 会议最佳论文评审委员会成员（Best Paper Committee Member）
• 2024, ASME Turbo Expo 会议伦敦联络会成员（Local Liaison Committee）
• 2022、2023、2024、2025年ASME Turbo Expo 会议分会主席（Session Chair）
• Appl. Therm. Eng., ASME J. Eng. Gas Turbines Power, ASME J. Turbomach, Thermal Sci. Eng. Appl., Int. J. Heat Mass Transf等期刊审稿人

• 2025.1，英国工程与物理科学研究委员会项目PI–旋转盘腔理论建模：在发动机设计程序中的应用
• 2024.4，德国西门子公司项目子课题负责人 – 燃气轮机旋转盘腔实验理论研究
• 2024.3，主持英国皇家学会中英交流项目PI– 贝叶斯理论以及深度神经网络在瞬态传热实验上的应用
• 2023.2，法国赛峰公司项目子课题负责人– 燃气入侵理论建模
• 2021.9，英国工程与物理科学研究委员会博士研究项目导师 – 先进航空发动机技术
• 2021.7，英国工程与物理科学研究委员会博士研究项目导师 – 航空发动机高空结冰理论建模
• 2022.1，英国工程与物理科学研究委员会博士研究项目导师 – 3D打印换热器设计与优化 
• 2020.10，德国西门子公司博士研究项目导师 – 旋转盘腔流动流固数值模拟
• 2021.6，英国工程与物理科学研究委员会项目CoI - 燃气入侵密度差影响
• 2017.1，英国工程与物理科学研究委员会项目指定研究员 - 航空发动机压气机内部旋转流动

在流体力学、传热传质，叶轮机械研究领域发表44篇SCI期刊论文，25篇EI会议论文.

Journal Publication:

2026

    Nicholas, T. E. W., Pernak, M. J., Lock, G. D., Scobie, J. A., and Tang, H. (February 27, 2026). "Fundamental Model for Compressor Cavity Heat Transfer: Theory and Validation." ASME. J. Turbomach. doi: https://doi.org/10.1115/1.4071240

2025

    Boldero, J. S., Vella, S., Tang, H., Scobie, J. A., Lock, G. D., & Sangan, C. M. (2025). The Effect of the Purge–Mainstream Density Ratio on Rim Seal Fluid Mechanics. International Journal of Turbomachinery, Propulsion and Power, 10(4), 46. https://doi.org/10.3390/ijtpp10040046 

    Vella, S., Salvatori, F., Scobie, J. A., Lock, G. D., Sangan, C. M., and Tang, H. (December 4, 2025). "Scaling Sealing Performance Across Engine Operating Conditions." ASME. J. Eng. Gas Turbines Power. June 2026; 148(6): 061002. https://doi.org/10.1115/1.4070053

    Vella, S., Scobie, J. A., Lock, G. D., Sangan, C. M., and Tang, H. (December 10, 2025). "Synchronization of the Unsteady Pressure Field: An Explanation for Amplified Ingress." ASME. J. Turbomach. May 2026; 148(5): 051013. https://doi.org/10.1115/1.4069941

    Syncerz, S., Nicholas, T., Tang, H., Lock, G. D., and Scobie, J. A. (October 23, 2025). "The Influence of Axial Throughflow Swirl on Buoyancy-Induced Flow in a Compressor Cavity." ASME. J. Turbomach. April 2026; 148(4): 041011. https://doi.org/10.1115/1.4069938 
    Harrington, J., Vella, S., Tang, H., Lock, G. D., Scobie, J. A., Santara, F. B., Jarrossay, C., Bonneau, D., Salvatori, F., and Sangan, C. M. (December 10, 2025). "The Adverse Effect of Pre-Swirl on Ingestion in a Downstream Cavity." ASME. J. Turbomach. June 2026; 148(6): 061012. https://doi.org/10.1115/1.4070350

    Tang, H, Vella, S, Sangan, C, Scobie, J & Lock, G 2025, 'Ingress Wave Model with Purge-Mainstream Density Ratio', International Journal of Heat and Mass Transfer, vol. 237, 126372. https://doi.org/10.1016/j.ijheatmasstransfer.2024.126372 
    Nicholas, TEW, Pernak, MJ, Lock, GD, Scobie, JA & Tang, H 2025, 'Mass and Heat Exchange in Rotating Compressor Cavities With Variable Cob Separation', ASME Journal of Engineering for Gas Turbines and Power, vol. 147, no. 1, 011018. https://doi.org/10.1115/1.4066247

2024

    Vella, S., Tang, H., Carnevale, M., Scobie, J. A., Lock, G. D., Salvatori, F., and Sangan, C. M. (December 11, 2024). "On the Relationship Between Swirl and Unsteadiness Within Turbine Rim Seals." ASME. J. Eng. Gas Turbines Power. April 2025; 147(4): 041031. https://doi.org/10.1115/1.4066997

    Pernak, M. J., Nicholas, T. E. W., Carnevale, M., Lock, G. D., Tang, H., and Scobie, J. A. (December 10, 2024). "Flow and Heat Transfer in Rotating Compressor Cavities With Inverted Shroud-Throughflow Temperature Differences." ASME. J. Turbomach. July 2025; 147(7): 071005. https://doi.org/10.1115/1.4067075

    Nicholas, T, Pernak, M, Williams, J, Lock, G, Scobie, J & Tang, H 2025, 'Transient Buoyancy-Induced Flow and Heat Transfer in Rotating Compressor Cavities', Applied Thermal Engineering, vol. 262, 125129. https://doi.org/10.1016/j.applthermaleng.2024.125129 
    Peters, T, Shelton, J, Tang, H & Trinh, P 2024, 'An enthalpy-based model for the physics of ice crystal icing', Journal of Fluid Mechanics, vol. 1001, A12, pp. A12-43. https://doi.org/10.1017/jfm.2024.1054 
    D. Graikos, H. Tang, M. Carnevale, N. Y. Bailey, J. A. Scobie; Rotationally induced ingress in rotor–stator systems. Physics of Fluids 1 July 2024; 36 (7): 075141. https://doi.org/10.1063/5.0207140

    Parry, J, Tang, H, Scobie, J, Lock, G & Carnevale, M 2024, 'Conjugate Modeling of a Closed Co-Rotating Compressor Cavity', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 146, no. 5, 051007. https://doi.org/10.1115/1.4063632 
    Nicholas, TEW, Scobie, JA, Lock, GD & Tang, H 2024, 'A Model of Mass and Heat Transfer for Disc Temperature Prediction in Open Compressor Cavities', Journal of Turbomachinery: Transactions of the ASME, vol. 146, no. 4, 041001. https://doi.org/10.1115/1.4064082 
    Tang, H, Scobie, J, Wang, Z & Lock, G 2024, 'A theoretical model for ingress through turbine rim seals based on physically observed unsteadiness', International Journal of Heat and Fluid Flow, vol. 106, 109300. https://doi.org/10.1016/j.ijheatfluidflow.2024.109300

2023
    Pernak, M, Nicholas, T, Williams, J, Jackson, R, Tang, H, Lock, G & Scobie, J 2023, 'Experimental Investigation of Transient Flow Phenomena in Rotating Compressor Cavities', Journal of Turbomachinery: Transactions of the ASME, vol. 145, no. 12, TURBO-23-1143. https://doi.org/10.1115/1.4063507 
    Nicholas, TEW, Pernak, MJ, Scobie, JA, Lock, GD & Tang, H 2023, 'Transient heat transfer and temperatures in closed compressor rotors', Applied Thermal Engineering, vol. 230, no. Part B, 120759. https://doi.org/10.1016/j.applthermaleng.2023.120759 
    Tang, H & Owen, JM 2023, 'Plume Model for Buoyancy-Induced Flow and Heat Transfer in Closed Rotating Cavities', Journal of Turbomachinery, vol. 145, no. 1, 011005 . https://doi.org/10.1115/1.4055449
    Lock, G, Jackson, R, Pernak, M, Pountney, O, Sangan, C, Owen, JM, Tang, H & Scobie, J 2023, 'Stratified and Buoyancy-Induced Flow in Closed Compressor Rotors', Journal of Turbomachinery, vol. 145, no. 1, 011008. https://doi.org/10.1115/1.4055448

2022
    Graikos, D, Tang, H, Sangan, C, Lock, G & Scobie, J, 2022, 'A New Interpretation of Hot Gas Ingress Through Turbine Rim Seals Influenced by Mainstream Annulus Swirl', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 144, no. 11, 111005 . https://doi.org/10.1115/1.4055457 
    Bailey, N, Owen, M, Mear, IF & Tang, H, 2022, 'Prediction of flows in enclosed rotor-stator cavities', Physics of Fluids, vol. 34, no. 10, 105115. https://doi.org/10.1063/5.0107336 
    Cao, N, Luo, X & Tang, H, 2022, 'A Bayesian model to solve a two-dimensional inverse heat transfer problem of gas turbine discs', Applied Thermal Engineering, vol. 214, 118762. https://doi.org/10.1016/j.applthermaleng.2022.118762 
    Jackson, R, Tang, H, Scobie, J, Owen, M & Lock, G, 2022, 'Measurement of Heat Transfer and Flow Structures in a Closed Rotating Cavity', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 144, no. 5, 051005 . https://doi.org/10.1115/1.4053392 
    Jackson, R, Tang, H, Scobie, J, Pountney, O, Sangan, C, Owen, M & Lock, G, 2022, 'Unsteady Pressure Measurements in a Heated Rotating Cavity', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 144, no. 4, 041017. https://doi.org/10.1115/1.4053390 
    Tang, H, Deveney, T, Shardlow, T & Lock, G, 2022, 'Use of Bayesian statistics to calculate transient heat fluxes on compressor disks', Physics of Fluids, vol. 34, no. 5, 056108. https://doi.org/10.1063/5.0091371

2021
    Pountney, O, Patinios, M, Tang, H, Luberti, D, Sangan, C, Scobie, J, Owen, M & Lock, G, 2021, 'Calibration of thermopile heat flux gauges using a physically-based equation', Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, vol. 235, no. 7, pp. 1806-1816. https://doi.org/10.1177/0957650920982103 
    Jackson, R, Tang, H, Scobie, J, Pountney, O, Sangan, C, Owen, M & Lock, G, 2021, 'Analysis of shroud and disk heat transfer in aero-engine compressor rotors', Journal of Engineering for Gas Turbines and Power, vol. 143, no. 9, 091005. https://doi.org/10.1115/1.4050631 
    Jackson, R, Luberti, D, Tang, H, Pountney, O, Scobie, J, Sangan, C, Owen, M & Lock, G, 2021, 'Measurement and Analysis of Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 143, no. 6, 061004. https://doi.org/10.1115/1.4049100 
    Tang, H & Owen, M, 2021, 'Effect of Radiation on Heat Transfer inside Aeroengine Compressor Rotors', Journal of Turbomachinery, vol. 143, no. 5, 051005. https://doi.org/10.1115/1.4050114 
    Luberti, D, Patinios, M, Jackson, R, Tang, H, Pountney, O, Scobie, J, Sangan, C, Owen, M & Lock, G, 2021, 'Design and Testing of a Rig to Investigate Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 143, no. 041030. https://doi.org/10.1115/1.4048601

2020
    Luberti, D, Tang, H, Scobie, J, Pountney, O, Owen, M & Lock, G 2020, 'Influence of Temperature Distribution on Radial Growth of Compressor Discs', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 142, no. 7, 071004. https://doi.org/10.1115/1.4046704

2019
    Tang, H, Cho, GH, Patinios, M, Scobie, J, Sangan, C, Owen, J & Lock, G 2019, 'Effect of Ingress on Flow and Heat Transfer Upstream and Downstream of a Rotating Turbine Disc', Aerospace, vol. 6, no. 5, 49, pp. 1-15. https://doi.org/10.3390/aerospace6050049 
    Owen, J, Tang, H & Lock, G 2019, 'Model of Effect of Hot Gas Ingress on Temperatures of Turbine Disks', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 141, no. 1, 012501, pp. 1-9. https://doi.org/10.1115/1.4040680

2018
    Tang, H, Puttock-Brown, MR & Owen, JM 2018, 'Buoyancy-Induced Flow and Heat Transfer in Compressor Rotors', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 140, no. 7, 071902. https://doi.org/10.1115/1.4038756 
    Owen, JM, Tang, H & Lock, GD 2018, 'Buoyancy-Induced Heat Transfer inside Compressor Rotors: Overview of Theoretical Models', Aerospace, vol. 5, no. 1, 32, pp. 1-22. https://doi.org/10.3390/aerospace5010032 
    Tang, H & Owen, J 2018, 'Theoretical Model of Buoyancy-Induced Heat Transfer in Closed Compressor Rotors', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 140, no. 3, 032605, pp. 1-7. https://doi.org/10.1115/1.4037926

2017
    Tang, H & Michael Owen, J 2017, 'Effect of buoyancy-induced rotating flow on temperatures of compressor disks', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 139, no. 6, 062506. https://doi.org/10.1115/1.4035400

2016
    Cho, GH, Tang, H, Owen, JM & Lock, GD 2016, 'On the measurement and analysis of data from transient heat transfer experiments', International Journal of Heat and Mass Transfer, vol. 98, pp. 268-276. https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.009

2015
    Tang, H, Shardlow, T & Owen, JM 2015, 'Use of fin equation to calculate Nusselt numbers for rotating disks', Journal of Turbomachinery: Transactions of the ASME, vol. 137, no. 12, 121003, pp. 1-10. https://doi.org/10.1115/1.4031355 
    Owen, JM & Tang, H 2015, 'Theoretical model of buoyancy-induced flow in rotating cavities', Journal of Turbomachinery: Transactions of the ASME, vol. 137, no. 11, TURBO-15-1037. https://doi.org/10.1115/1.4031353

Conferences:

2025

    Nicholas, TEW, Pernak, MJ, Lock, GD, Scobie, JA, & Tang, H. "Fundamental Model for Compressor Cavity Heat Transfer: Theory and Validation." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A007. ASME. https://doi.org/10.1115/GT2025-152729
    Vella, S, Salvatori, F, Scobie, JA, Lock, GD, Sangan, CM, & Tang, H. "Scaling Sealing Performance Across Engine Operating Conditions." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A008. ASME. https://doi.org/10.1115/GT2025-152884
    Vella, S, Scobie, JA, Lock, GD, Sangan, CM, & Tang, H. "Synchronisation of the Unsteady Pressure Field: an Explanation for Amplified Ingress." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A009. ASME. https://doi.org/10.1115/GT2025-152901
    Harrington, J, Vella, S, Tang, H, Lock, GD, Scobie, JA, Bintou Santara, F, Jarrossay, C, Bonneau, D, Salvatori, F, & Sangan, CM. "The Adverse Effect of Pre-Swirl on Ingestion in a Downstream Cavity." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A017. ASME. https://doi.org/10.1115/GT2025-154102
    Syncerz, S, Nicholas, TEW, Lock, GD, Tang, H, & Scobie, JA. "The Influence of Axial Throughflow Swirl on Buoyancy-Induced Flow in a Compressor Cavity." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A006. ASME. https://doi.org/10.1115/GT2025-152677
    Jason S. Boldero, Simon Vella, Hui Tang,  James A. Scobie, Gary D. Lock, and Carl M. Sangan, “The effect of purge-mainstream density ratio on rim seal fluid mechanics”, Paper Number ETC2025-210, Published at Proceedings of the 16th European Turbomachinery Conference (ETC16)  Turbomachinery, Fluid Dynamics and Thermodynamics, March 24-28, 2025; Hannover, Germany

2024
    Nicholas, T, Pernak, M, Lock, G, Scobie, J & Tang, H 2024, Mass and Heat Exchange in Rotating Compressor Cavities with Variable Cob Separation. in Heat Transfer: Internal Air Systems; Heat Transfer: Internal Cooling; Industrial and Cogeneration., V008T14A011, Proceedings of the ASME Turbo Expo, vol. 8, ASME, ASME 2024 Turbomachinery Technical Conference & Exposition, London, UK United Kingdom, 23/06/24. https://doi.org/10.1115/GT2024-126600 
    Vella, S, Tang, H, Carnevale, M, Scobie, J, Lock, G, Salvatori, F & Sangan, C 2024, On the Relationship Between Swirl and Unsteadiness Within Turbine Rim Seals. in Heat Transfer., GT2024-129016, ASME 2024 Turbomachinery Technical Conference & Exposition, London, UK United Kingdom, 23/06/24. https://doi.org/10.1115/GT2024-129016 
    Pernak, M, Nicholas, T, Carnevale, M, Lock, G, Tang, H & Scobie, J 2024, Flow and Heat Transfer in Rotating Compressor Cavities With Inverted Shroud-Throughflow Temperature Differences. in Heat Transfer: Internal Air Systems; Heat Transfer: Internal Cooling; Industrial and Cogeneration., V008T14A003, Proceedings of the ASME Turbo Expo, vol. 8, American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/GT2024-123211

2023
    Nicholas, T, Scobie, J, Lock, G & Tang, H 2023, A Model of Mass and Heat Transfer for Disc Temperature Prediction in Open Compressor Cavities. in Heat Transfer: Internal Air Systems. vol. 7B, GT2023-102248, ASME Turbo Expo 2023, Boston, Massachusetts, USA United States, 26/06/23. https://doi.org/10.1115/GT2023-102248 
    Parry, J, Tang, H, Scobie, JA, Lock, GD & Carnevale, M 2023, Conjugate Modelling of a Closed Co-Rotating Compressor Cavity. in Heat Transfer: Internal Air Systems. vol. 7B, GT2023-102900, ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, 26/06/23. https://doi.org/10.1115/GT2023-102900 
    Pernak, MJ, Nicholas, TEW, Williams, JT, Jackson, RW, Tang, H, Lock, GD & Scobie, JA 2023, Experimental Investigation of Transient Flow Phenomena in Rotating Compressor Cavities. in Heat Transfer: Internal Air Systems. vol. 7B, GT2023-102294, ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, 26/06/23. https://doi.org/10.1115/GT2023-102294

2022
    Tang, H & Owen, M 2022, Plume model for buoyancy-induced flow and heat transfer in closed rotating cavities. in Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling., V06BT14A002, Proceedings of the ASME Turbo Expo, vol. 6-B, American Society of Mechanical Engineers (ASME), ASME Turbo Expo 2022, Rotterdam, Netherlands, 13/06/22. https://doi.org/10.1115/GT2022-80477 
    Lock, G, Jackson, R, Pernak, M, Pountney, O, Sangan, C, Owen, M, Tang, H & Scobie, J 2022, Stratified and Buoyancy-Induced Flow in Closed Compressor Rotors. in Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling., V06BT14A007, Proceedings of the ASME Turbo Expo, vol. 6-B, American Society of Mechanical Engineers (ASME), ASME Turbo Expo 2022, Rotterdam, Netherlands, 13/06/22. https://doi.org/10.1115/GT2022-82023 
    Graikos, D, Tang, H, Sangan, C, Lock, G & Scobie, J 2022, A New Interpretation of Hot Gas Ingress Through Turbine Rim Seals Influenced by Mainstream Annulus Swirl. in Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling., V06BT14A008, Proceedings of the ASME Turbo Expo, vol. 6-B, American Society of Mechanical Engineers (ASME), ASME Turbo Expo 2022, Rotterdam, Netherlands, 13/06/22. https://doi.org/10.1115/GT2022-82430 
2021

    Jackson, R, Tang, H, Scobie, J, Pountney, O, Sangan, C, Owen, M & Lock, G 2021, Unsteady Pressure Measurements in a Heated Rotating Cavity. in Proceedings of ASME Turbo Expo 2021: Volume 5B., V05BT14A005, Proceedings of the ASME Turbo Expo, vol. 5B-2021, American Society of Mechanical Engineers (ASME), U. S. A., ASME Turbo Expo 2021, 7/06/21. https://doi.org/10.1115/GT2021-59090 
    Jackson, R, Tang, H, Scobie, J, Owen, M & Lock, G 2021, Measurement of Heat Transfer and Flow Structures in a Closed Rotating Cavity. in Proceedings of the ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 5B., V05BT14A013, Proceedings of the ASME Turbo Expo, vol. 5B-2021, U. S. A., ASME Turbo Expo 2021, 7/06/21. https://doi.org/10.1115/GT2021-59605 
2020

    Luberti, D, Patinios, M, Jackson, R, Tang, H, Pountney, O, Scobie, J, Sangan, C, Owen, M & Lock, G 2020, Design and Testing of a Rig to Investigate Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors. in Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition ., GT2020-14422, Proceedings of the ASME Turbo Expo 2020.
    Jackson, R, Luberti, D, Tang, H, Pountney, O, Scobie, J, Sangan, C, Owen, M & Lock, G 2020, Measurement and Analysis of Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors. in Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition., GT2020-16219, Proceedings of the ASME Turbo Expo.
    Jackson, RW, Luberti, D, Tang, H, Pountney, OJ, Scobie, JA, Sangan, CM, Owen, JM & Lock, GD 2020, Measurement and analysis of buoyancy-induced heat transfer in aeroengine compressor rotors. in Heat Transfer. Proceedings of the ASME Turbo Expo, vol. 7C-2020, The American Society of Mechanical Engineers(ASME), ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, GT 2020, Virtual, Online, 21/09/20. https://doi.org/10.1115/GT2020-16219

2019
    Luberti, D, Tang, H, Scobie, J, Pountney, O, Owen, M & Lock, G 2019, Influence of temperature distribution on radial growth of compressor discs. in Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition., GT2019-91848, American Society of Mechanical Engineers (ASME), ASME Turbo Expo 2019, Phoenix, USA United States, 17/06/19.

2017
    Tang, H & Owen, J 2017, Theoretical Model of Buoyancy-Induced Heat Transfer in Closed Compressor Rotors. in ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. vol. Volume 5B: Heat Transfer, GT2017-63060, Charlotte, North Carolina, USA, pp. V05BT15A002.

2016
    Tang, H & Owen, J 2016, Effect of Buoyancy-Induced Rotating Flow on Temperatures of Compressor Discs. in ASME Proceedings. vol. 5A: Heat Transfer, GT2016-56374, ASME, New York, USA, pp. V05AT15A004, ASME Turbo Expo 2016, Seoul, Korea, Democratic People's Republic of, 13/06/16.

2015
    Tang, H, Shardlow, T & Owen, JM 2015, Use of fin equation to calculate nusselt numbers for rotating discs. in Proceedings ASME Turbo Expo, 2015: Turbine Technical Conference and Exposition, Volume 5C, Heat Transfer. American Society of Mechanical Engineers (ASME), pp. V05CT00A001, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, GT 2015, Montreal, Canada, 15/06/15. https://doi.org/10.1115/GT2015-42029